Fun Facts

Americans use 25 billion polystyrene cups every year, all of which are technically recyclable through existing mechanical and chemical processes.

Over 15 million tons of polystyrene are produced globally each year, accounting for roughly 5% of all plastics manufactured worldwide.

Polystyrene is extremely durable, lasting over 500 years, which is why recycling it into new products makes far more sense than landfilling.

Approximately 5% of polystyrene waste is recycled in the United States, despite being technically 100% recyclable.

Expanded polystyrene (EPS) is approximately 90-95% air by volume, making it an extremely lightweight material.

Polystyrene is commonly found during coastal cleanups, making recycling infrastructure and proper disposal critical to keeping it out of waterways.

Because polystyrene is 95% air, it takes up significant landfill space despite being lightweight. Compaction technology solves this by reducing volume 50:1 for efficient recycling.

Recycling one ton of polystyrene saves approximately 2.3 tons of CO₂ emissions compared to virgin production.

An estimated 1,369 tons of polystyrene end up in US landfills daily, representing a massive untapped recycling opportunity worth millions in recoverable material.

Polystyrene recycling can cost over $1,000 per ton at small scale, compared to $30-50 per ton for landfill disposal. Costs drop significantly with compaction technology and larger operations.

Approximately 80% of polystyrene produced in the US goes to landfills rather than being recycled, despite the material being 100% recyclable. Better infrastructure could change this.

Over 12 billion kilograms of polystyrene are produced globally each year, representing an enormous potential resource if recycling infrastructure keeps expanding.

Only 32% of the US population currently has access to polystyrene recycling programs, showing the need for more infrastructure rather than bans.

The global EPS recycling market was valued at approximately $0.7 billion in 2025 and continues to grow.

More than 12 US states have enacted bans or restrictions on single-use polystyrene food containers, despite the material being 100% recyclable.

Recycled polystyrene requires only about 10 megajoules of energy per kilogram, far less than virgin production.

In 2025, food-grade recycled polystyrene was successfully achieved for the first time at commercial scale.

Polystyrene was first discovered in 1839 by German apothecary Eduard Simon, derived from a natural resin.

'Styrofoam' is actually a trademarked brand name by Dow Chemical, technically referring to XPS insulation, not cups.

Polystyrene can be compressed to just 1/50th of its original volume, making compacted recycling highly efficient.

Over 100,000 marine animals are affected by plastic pollution annually. Proper polystyrene recycling keeps the material out of waterways and oceans entirely.

Polystyrene and foam products can take up significant municipal waste volume, which is precisely why compaction and recycling programs are so valuable.

Expanded polystyrene (EPS) is about 98% air and only 2% plastic, making it one of the lightest packaging materials and highly efficient to compact for recycling.

Polystyrene foam has an insulation value of roughly R-4 per inch, which is why it is widely used in building insulation and helps reduce energy consumption in homes.

Industrial densifiers can compact EPS foam at ratios up to 90:1, turning a truckload of loose foam into a dense block small enough to fit on a pallet.

Polystyrene is made from the monomer styrene (C₈H₈), a naturally occurring substance found in small amounts in foods like strawberries, cinnamon, and coffee beans.

General-purpose polystyrene melts at around 240°C (464°F). During recycling, the material is heated just enough to be remolded into new products without degrading its quality.

Polystyrene is classified as resin identification code #6. Knowing this number helps consumers sort it correctly into recycling streams where programs accept it.

Compacted polystyrene uses up to 40 times less transport fuel than loose foam, dramatically lowering the carbon footprint of getting recycled material to processing facilities.

Polystyrene is a thermoplastic, meaning it can theoretically be melted and reformed an unlimited number of times without significant loss of structural properties.

There are over 1,000 foam drop-off recycling locations across the United States, and the number continues to grow as communities invest in polystyrene recovery programs.

Polystyrene is highly water-resistant and does not absorb moisture, which makes it ideal for protecting goods during shipping and easier to clean for recycling.

Recycled polystyrene is used to make over a thousand different products including picture frames, crown molding, park benches, and seedling trays.

Polystyrene contains roughly 16,000 BTUs per pound of energy. When mechanical recycling is not available, this energy can be recovered through waste-to-energy facilities.

The FDA has approved polystyrene for food-contact use for over 50 years. Recycled food-grade polystyrene can be processed back into safe food packaging.

EPS packaging weighs up to 70% less than alternative materials like molded paper pulp, which means lower shipping emissions and reduced transportation costs.

Global EPS production capacity exceeds 7 million tons per year. As recycling infrastructure expands, a growing share of this material is being recovered and reprocessed.

The polystyrene recycling industry supports tens of thousands of jobs worldwide, from collection and sorting to processing and manufacturing of recycled products.

Over 500 schools across North America have implemented foam tray recycling programs, teaching children about sustainability while diverting waste from landfills.

EPS packaging prevents up to 99% of product damage during shipping for fragile goods like electronics, reducing the waste and emissions caused by returns and replacements.

Dissolution recycling uses solvents to separate pure polystyrene from contaminants, producing near-virgin quality material and opening new pathways for hard-to-recycle foam.

Styrene occurs naturally in over 50 foods including wheat, peanuts, and beef. The compound is metabolized by the body and does not accumulate.

Buildings insulated with EPS or XPS polystyrene foam can save up to 30% on heating and cooling costs, reducing overall energy demand and greenhouse gas emissions.

EPS insulation installed in buildings can maintain its performance for over 50 years. At end of life, it can be removed and recycled into new insulation or products.

Manufacturing EPS uses up to 80% less water compared to producing equivalent paper-based packaging, making it a surprisingly water-efficient material choice.

Polystyrene recycling collection rates in the U.S. have been growing by roughly 15% per year as more municipalities add foam to their accepted materials lists.

Recycled polystyrene pellets can sell for over $500 per ton on the commodity market, making foam recovery economically viable when proper infrastructure is in place.

Recycled polystyrene is increasingly used as lightweight backing material in solar panel installations, giving old foam a second life in renewable energy systems.

Recycled polystyrene is widely used to make seedling trays for greenhouses and nurseries, supporting agriculture while keeping foam out of landfills.

About 60% of cold storage and refrigerated warehouse facilities use polystyrene insulation panels, and these panels can be recycled when facilities are renovated.

Advanced pyrolysis technology can recover up to 95% of styrene monomer from waste polystyrene, enabling true circular recycling back into virgin-quality plastic.

EPS is essential for shipping temperature-sensitive vaccines and medical supplies. After use, these medical coolers can be collected and recycled through specialized programs.

Crushed recycled EPS beads are mixed into lightweight concrete, reducing building weight by up to 25% while providing thermal insulation and giving foam waste a second life.